Hobart 500487 Handler 125 115-Volt 30-to-125 Amp Arc Single-Phase Wire Welding Package

Hobart 500487 Handler 125 115-Volt 30-to-125 Amp Arc Single-Phase Wire Welding Package Review

Hobart 500487 Handler 125 115-Volt 30-to-125 Amp Arc Single-Phase Wire Welding Package Feature

• Comfortable 8-foot (2.4 m) H-9 gun with liner for .023- to .035-inch (0.6-0.9 mm) wire and three .030-inch (0.9 mm) contact tips
• Work clamp with 10-foot (3 m) work cable
• Spool shaft to accommodate 4-inch spools (optional hub kit available for 8-inch spools)
• Self-resetting thermal overload and motor protection
• Power cord with plug

Rugged and portable, the Handler 125 wire feed welder operates with 115-volt household current. Comes ready to weld without shielding gas using 0.030-0.035in. flux cored wire. This unit has an optional solenoid valve for welding with 0.023-0.030in. solid wire and gas shielding (when used with MIG Conversion Kit item# 164796). Use C-25 gas (75% argon/25% C02) on 22-gauge, 1/8in. steel for cleaner weld with less spatter. Use Tri-Max gas and stainless steel wire for welding on 16- to 12-gauge stainless steel. MIG gas upgrade kit available for greater versatility (see Item# 164796). U.S.A. Volts: 115, Amps: 125, Duty Cycle: 20% at 90 Amps, 19V, Mig Ready: No, requires MIG conversion kit, Wire Feed Speed Control: Yes, 0 - 500 IPM, Weldable Metals: Steel and stainless steel, Weld Thickness (in.): 18-gauge to 3/16in. steel, Clamp Cable Length (ft.): 10, Regulator and Gas Hose Included: No, Shielding Gas Required: No, Welding Wire Diameter (in.): 0.023 -0.035, Cart: No, Dimensions L x W x H (in.): 9 7/8 x 12 1/8 x 16 7/8